SD 9000 Series Sliding Doors

Good for all types of traffic in a clean room, dry storage, refrigerated or wash down environments.

SDA 9000 (Automatic)

The SDA 9000 is powered by the Tormax iMotion^® Direct Drive which is designed for long lasting efficiency and performance. The Tormax iMotion^® Direct Drive has no gears to wear, no leaking oil or grease, no motor commutator, brushes or couplings to replace. The result is a long service life with lowest total cost of ownership. The iMotion^® drive is extremely quiet in operation, and offers self-adjusting programmable iMotion^® micro-processor controller with advanced auto diagnostics, and plug and play features which make installation and operation fast and simple.

The iMotion^® direct drive maintains optimal performance as all times through the us of an on-board self-adjusting closed loop iMotion^® microprocessor control system. The system periodically checks the door's operating limits and makes automatic adjustments to compensate for temperature, wind, dust, dirt, stack pressure and other outside factors, which alter the system's performance.

SDM 9000 (Manual) 

The SDM 9000 is identical in design to the SDA 9000 but features a manual pull handle for opening and closing.

Features & Advantages  for both SDA and SDM 9000 Models

All doors feature a 1/8" ABS outer shell forming a 2”, 4” or 6” thick panel that will retain its physical properties to -40°C.

The door body is impervious to moisture, acid, petroleum products, animal fats, rodents, insects and salt solutions.

Cores are foamed in place high density non-CFC urethane bonded to the outer shell producing an "R" factor of 8 per inch.

This corrosion free door has no wood or steel in the panel. All perimeter edges are rigid welded PVC tubing creating the structure of the door panel.

They operate on the sliding door hardware with neoprene rollers that are enclosed in a low maintenance aluminum corrosion resistant track. The track allows for down and in movement for a tight seal when closed, up and out creates a smooth transition to the open position. Both panel and floor mounted door guides along with butts in both opening and closing modes limit the door movement for safe transition from closed to open every time.

Limitations

This series is manufactured to suit your opening size up to a 60” x 120” single slide or 120” x 120” bi-parting with-out splicing. Larger sizes available, field splicing may be required.

Optional impact plates, vision panels, hoods, back up headers and casings and heated gaskets are all available.

Emergency egress passage doors are also available, no floor hardware required swing depending on slide of panel.

Upgrade to the SDA 9000 by Power operating your sliding door either at time of order or in the field with a conversion kit to fit your existing hardware.

All doors are factory tested and conveniently packaged ready to install upon delivery with easy-to-follow instructions in every package.

These require only periodic cleaning with a strong industrial soap or detergent. Regular lubrication of moving parts is also recommended.

This series carries a two year track and hardware system warranty and two year panel warranty against defects, material and workmanship. All warranties stipulate correct installation and sizing requirements.

Most orders are filled within a 2 week period. All orders are FOB Kalamazoo, MI.